Brass sleeve pressing machine

The brass sleeve pressing machine is a device that presses hot runner coils into the grooves of brass sleeves to create copper sleeve heating coils. It is widely used in the heating coil manufacturing industry. It features simple operation, tight winding and high efficiency.

• 价格：元

Online Inquiry

Product Details

Technical Specifications

Technical Specifications

Front

Back

Side

技术参数 Technical parameters
产品名称 Product name	铜套扣压机		Brass sleeve pressing machine
产品组成 Product composition	1.电机：调速电机 2.脚踏开关		1.  Motor: variable-speed motor 2.  Foot switch
主要参数 Main parameters	1.电压：220 V        功率：120 W   2.有效行程：120mm  3.轴宽度：0-320mm 4.速度：可调节 5.长*宽*高：450*300*1000mm		1.  Voltage: 220V      Power: 120W 2.  Effective travel:120mm  3.  Bearing width:0-320mm  4.  Speed:   adjustable 5.  Length*width*height:450*300*1000mm

操作说明：

1. 连接脚踏开关和气管，打开电源。

2. 按键说明：

   1）调速开关：调整扣压速度。

   2）倒顺开关：扣压热流道的方向，正向或反向。

   3）急停开关：紧急情况下停止机器。

   4）气压开关：控制气压，正常控制在4-6。

3. 正常情况下，打开机器调整好速度和扣压方向后，打开气压开关，将铜套和热流道放至在滚轴上，踩下脚踏开关开始绕制发热圈

   
   

   1.Connect the foot switch and the air pipe, and turn on the power.

   2.key manual

   1）Speed control switch: Adjusts the crimping speed.

   2）Reverse and forward switch: Press the direction of the hot runner, either forward or reverse.

   3）Emergency stop switch: To stop the machine in an emergency.

   4）Air pressure switch: Controls air pressure. Under normal circumstances, the air pressure is controlled between 4 and 6.

   3.Under normal circumstances, after adjusting the speed and clamping direction of the machine, turn on the air pressure switch, place the copper sleeve and hot runner on the roller, and step on the foot switch to start winding the heating coil.